ITT HA440 Seal Kit V2 (Spring and Ceramic)
SK-PS110
ADVISE TO USE WATERWAY SEAL IF SHOWING OUT OF STOCK
£53.69
| Type of product: | Water pump shaft seal kit |
|
Pump models: |
Hydroair Magnaflow 440 or HA440 single and dual speed |
|
Combined length when faced together: |
33mm |
|
Outer diameter: |
Ceramic = 31mm and spring base = 41mm |
| Assembly: | Ceramic and carbon parts must meet to create a spring loaded seal. We suggest that you use a small amount of silicone to fix the metal base against the plastic housing. The rubber washer make the other parts water tight against the plastic housing. |
| Additional notes: |
This is the replacement seal kit for the grey wet end HA440.It can still be used with the Black headed older HA440 pump you just need to remove the o'ring and use silicone instead. Please be aware that when attempting to remove the black wet end, if it looks fairly rusted through you will most likely not be able to remove the impeller in 1 piece. In this instance you would need to buy a new pump or another complete wet end. THE PRICE SHOWN ABOVE IS OUR ON LINE PRICE. SPAFIX UK R.R.P £55 |
Related Items
The following related items may also be of interest:
