Gecko 3.6kW Flow Thru Heater MSPA
HT-GEC36
3 available, order now for delivery Tuesday
£131.11
| Type of product: | Heater assembly |
| Make and Model: | Gecko replacement, has also been made by Thermocore and RMF in the past. Most common part number is CC2360-0601ET. |
| Power: |
Volts: 230 Hz: 50 KW: 3.6 Amps: 14.4 |
| Specification |
Sensor compatibility: Gecko & Hydroquip probe and ribbon style Material spec: Required flow rate: Set by pressure switch Flow detection: 2-PSI Tecmark pressure switch |
| Compatible with: |
Gecko MSPA control box (the big blue one). Also replaces Canspa heater SN 3636603051350 |
| Connections / Fixings: | Usually held in the blue plastic moulding of the control box at the bottom of the Spa pack. Hi limit sensor pouch sits on top of the heater, also known to be used with the ribbon style hi-limit. 2" white plastic female sockets to connect to plumbing. You will need to re-connect your pressure switch also. |
| Dimensions: |
Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | If your heater looks the same as this one it most probably is but contact us if you need further help. |
